Close
(0) Προϊόντα
Δεν υπάρχουν προϊόντα στο καλάθι σας.
ΟΛΕΣ ΟΙ ΚΑΤΗΓΟΡΙΕΣ
    Filters
    Προτιμήσεις
    Αναζήτηση
    Κατασκευαστής: REAL FILAMENTS

    REAL PLA Recycled 3D Printer Filament - Orange - spool of 1Kg - 1.75mm (REFPLARORANGE1000MM175)

    Kωδικός ACI: REFPLARORANGE1000MM175
    Part number: NLPLARORANGE1000MM175
    EAN: 8719345014024
    Introducing more sustainable plastics is key to reduce waste and save natural resources. Real filaments' Recycled PLA 3D filament is produced from quality ensured waste supplies and checked for consistency during the entire production process, ensuring the best possible 3D printing experience while reusing at least 95% material. With our famous white recyclable cardboard spool, this product is a big step in using precious natural resources in a better way and part our our continued effort in making 3D printing an even more 'greener' alternative to traditional manufacturing methods. On the spool is 1 kg filament in 1.75 mm diameter. Due to the nature of the product's source materials there may be slight color variations between batches. The material prints best at 210 degrees and can be printed without heated bed using 3Dlac. However, a heated bed is recommended to improve adhesion and make it easier to remove the print after the plate has cooled down.
    Προδιαγραφές προϊόντων
    Κατασκευαστής REAL FILAMENTS
    Υλικό PLA RECYCLED
    Χρώμα Orange
    Διάμετρος 1.75 mm.
    Βάρος 1 Kg.
    Introducing more sustainable plastics is key to reduce waste and save natural resources. Real filaments' Recycled PLA 3D filament is produced from quality ensured waste supplies and checked for consistency during the entire production process, ensuring the best possible 3D printing experience while reusing at least 95% material. With our famous white recyclable cardboard spool, this product is a big step in using precious natural resources in a better way and part our our continued effort in making 3D printing an even more 'greener' alternative to traditional manufacturing methods. On the spool is 1 kg filament in 1.75 mm diameter. Due to the nature of the product's source materials there may be slight color variations between batches. The material prints best at 210 degrees and can be printed without heated bed using 3Dlac. However, a heated bed is recommended to improve adhesion and make it easier to remove the print after the plate has cooled down.
    Προδιαγραφές προϊόντων
    Κατασκευαστής REAL FILAMENTS
    Υλικό PLA RECYCLED
    Χρώμα Orange
    Διάμετρος 1.75 mm.
    Βάρος 1 Kg.
    Οι πελάτες που αγόρασαν αυτό το προϊόν αγόρασαν επίσης

    REAL PLA 3D Printer Filament - White - spool of 0.5Kg - 1.75mm (REFPLAWHITE500MM175)

    Kωδικός ACI: REFPLAWHITE500MM175
    EAN: 8719345000270
    PLA filament White 1.75 mm 500 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees that the PLA is high-quality and diameter consistent filament, giving you the best 3D printing experience. PLA is great for beginners to 3D printing, but also novices will find it great to use, as it is easy to work with while still give stunning results. PLA filament is available in multiple colors, but also different types are available within the Real brand. PLA (polylactic acid) filament is amongst the oldest and still the most heavily used mediums in the 3D printing community, mainly due to its benefits as a versatile and environmentally friendly thermoplastic. Both organic and biodegradable, PLA is easily compounded with other ingredients to influence its final properties, for example flexibility and metallically. The uncolored form of Real PLA is a translucent off-white color and has a printing temperature between 195 - 205 degrees (depending on hot end characteristics). Darker colors of Real may require a few extra degrees of temperature due to the coloring process. The filament should extrude smoothly and appear slightly shiny. PLA is denser and tougher than ABS, but is more brittle and susceptible to cracking under high loads. It is also less resistant to the outdoor elements (UV light and water) than other common thermoplastics (see Nylon, ABS and PETG). PLA can print well on an unheated surface using Blue Painters or Kapton tape, and most 3D print stickers. For ease and convenience, we recommend using spray such as 3DLAC on a glass bed. A low bed temperature between 50 - 60 degrees further reduces the chance of warping and makes final print removal easier once the print surface has cooled. Also check out the Real Satin and flex lines of PLA filament for even more options!

    REAL PLA 3D Printer Filament - Red - spool of 0.5Kg - 1.75mm (REFPLARED500MM175)

    Kωδικός ACI: REFPLARED500MM175
    EAN: 8719128321547
    PLA filament Red 1.75 mm 500 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees that the PLA is high-quality and diameter consistent filament, giving you the best 3D printing experience. PLA is great for beginners to 3D printing, but also novices will find it great to use, as it is easy to work with while still give stunning results. PLA filament is available in multiple colors, but also different types are available within the Real brand. PLA (polylactic acid) filament is amongst the oldest and still the most heavily used mediums in the 3D printing community, mainly due to its benefits as a versatile and environmentally friendly thermoplastic. Both organic and biodegradable, PLA is easily compounded with other ingredients to influence its final properties, for example flexibility and metallically. The uncolored form of Real PLA is a translucent off-white color and has a printing temperature between 195 - 205 degrees (depending on hot end characteristics). Darker colors of Real may require a few extra degrees of temperature due to the coloring process. The filament should extrude smoothly and appear slightly shiny. PLA is denser and tougher than ABS, but is more brittle and susceptible to cracking under high loads. It is also less resistant to the outdoor elements (UV light and water) than other common thermoplastics (see Nylon, ABS and PETG). PLA can print well on an unheated surface using Blue Painters or Kapton tape, and most 3D print stickers. For ease and convenience, we recommend using spray such as 3DLAC on a glass bed. A low bed temperature between 50 - 60 degrees further reduces the chance of warping and makes final print removal easier once the print surface has cooled. Also check out the Real Satin and flex lines of PLA filament for even more options!

    REAL PLA Recycled 3D Printer Filament - Blue - spool of 1Kg - 1.75mm (REFPLARBLUE1000MM175)

    Kωδικός ACI: REFPLARBLUE1000MM175
    EAN: 8719345013874
    Introducing more sustainable plastics is key to reduce waste and save natural resources. Real filaments' Recycled PLA 3D filament is produced from quality ensured waste supplies and checked for consistency during the entire production process, ensuring the best possible 3D printing experience while reusing at least 95% material. With our famous white recyclable cardboard spool, this product is a big step in using precious natural resources in a better way and part our our continued effort in making 3D printing an even more 'greener' alternative to traditional manufacturing methods. On the spool is 1 kg filament in 1.75 mm diameter. Due to the nature of the product's source materials there may be slight color variations between batches. The material prints best at 210 degrees and can be printed without heated bed using 3Dlac. However, a heated bed is recommended to improve adhesion and make it easier to remove the print after the plate has cooled down.

    REAL PLA Recycled 3D Printer Filament - Silver - spool of 1Kg - 1.75mm (REFPLARSILVER1000MM175)

    Kωδικός ACI: REFPLARSILVER1000MM175
    EAN: 8719345013980
    Introducing more sustainable plastics is key to reduce waste and save natural resources. Real filaments' Recycled PLA 3D filament is produced from quality ensured waste supplies and checked for consistency during the entire production process, ensuring the best possible 3D printing experience while reusing at least 95% material. With our famous white recyclable cardboard spool, this product is a big step in using precious natural resources in a better way and part our our continued effort in making 3D printing an even more 'greener' alternative to traditional manufacturing methods. On the spool is 1 kg filament in 1.75 mm diameter. Due to the nature of the product's source materials there may be slight color variations between batches. The material prints best at 210 degrees and can be printed without heated bed using 3Dlac. However, a heated bed is recommended to improve adhesion and make it easier to remove the print after the plate has cooled down

    REAL PLA Recycled 3D Printer Filament - Green - spool of 1Kg - 1.75mm (REFPLARGREEN1000MM175)

    Kωδικός ACI: REFPLARGREEN1000MM175
    EAN: 8719345014048
    Introducing more sustainable plastics is key to reduce waste and save natural resources. Real filaments' Recycled PLA 3D filament is produced from quality ensured waste supplies and checked for consistency during the entire production process, ensuring the best possible 3D printing experience while reusing at least 95% material. With our famous white recyclable cardboard spool, this product is a big step in using precious natural resources in a better way and part our our continued effort in making 3D printing an even more 'greener' alternative to traditional manufacturing methods. On the spool is 1 kg filament in 1.75 mm diameter. Due to the nature of the product's source materials there may be slight color variations between batches. The material prints best at 210 degrees and can be printed without heated bed using 3Dlac. However, a heated bed is recommended to improve adhesion and make it easier to remove the print after the plate has cooled down.